Tree Cable Designed For Loxone System

Posted 01 November 2019

Tags: Building Control Home Automation Cables Tru Smart Home

Tree cable for Loxone system

FSC Global now stock the all-in-one Tree cable, designed for use for Loxone Tree devices - whether that’s motion sensors, switches or LED spots. Available on 100m, 200m and 500m reels as well as cut to length and all for next day despatch. CPR certified and LSHF versions are also available.

The standardised colour-coding of the pairs greatly reduces the margin for error on an install. The Tree cable can be used universally and is optimally suited for the communication of all Tree products as well as for the power supply of the respective components.

Tree Sensors

Peripheral products such as motion detectors, Touch Pure switches and actuators are connected to the Tree branch via the twisted green / white wire pair. The power supply for peripheral products is very low. That’s why the equally twisted orange / white pair of wires is ideal for the power supply.
Loxone Tree Infographic

Tree Spots & Dimmers

Tree products that serve as consumers typically require a power supply that can deliver more power. This is the case, for example, with Tree lighting products such as LED spots and LED RGBW dimmers. Especially for these products, the Loxone Tree Cable is equipped with two 1.5mm² orange / white wires in addition to the two twisted pairs. Thus, there is always enough power to reliably supply Loxone Tree spots and dimmers.

  • Stocked for next day despatch
  • 100m, 200m & 500m reels
  • Cut to length
  • CPR certified
  • LSHF option
  • Huge stocks of HA & BMS cables

For more information and technical data, click here