BS 6387 “CWZ“ Fire Resistant conduit wires

Single core Low Smoke Halogen Free, fire resistant cables. Designed for use in conduits and trunking. The conductors are semi flexible to BS6360 & IEC60228 class 2 to enable easy installation.

Available in a full range of traditional and harmonised colours from leading manufacture brands including:

Prysmian ( Pirelli ) FP100      Draka FireTuf Sifer      IDH Kilflam 1000

 

Technical Information

Conductors Copper wire to BS6360 / IEC60228 class 2 stranded
Fire resistant IEC60331 & BS6360 CWZ when tested in steel conduit
Smoke emission BS7211
Acid gas emission BS 6425 HCl < 0.5%

 

 

Technical Data

Part No.
Size
& mm²
Stranding
Weight
Kg/Km
O/D
mm
 3871501xx   1.5   7/0.53   26   3.3 
 3872501xx   2.5   7/0.63   38   3.7 
 3874001xx   4.0   7/0.85   55   4.3 
 3876001xx   6.0   7/1.04   76   5.0 

To show the colour required please replace xx in the part number with :
00 Black     01 Blue
02 Brown   03 Red
05 Grey      08 Orange
09 Yellow   99 Green/Yellow

 

At FSC we refer to LSHF as Low Smoke Halogen Free

This term is interchangeable with LSZH (Low Smoke Zero Halogen), LSOH (Low Smoke Zero Halogen), OHLS (Zero Halogen Low Smoke) and FRNC (Flame Retardant Non-Corrosive). Beware of the terms LSF (Low Smoke and Fume) or RP (Reduced Propogation), when relating to signal or control cables will normally be modified PVC and produce 'Loads of Smoke and Fume'!
Back to last page Return to TOP
Your browser does not support CSS. If images appear below, please disregard them.