Two Pair Screened 22(7)AWG

Used extensively in the security industry for CCTV applications including telemetry. Also suitable for computer and instrumentation applications where it is important to provide a high level screening from external sources, together with low levels of cross talk between pairs.

Construction - Individual Screen

Tinned copper conductors 22(7) AWG 0.35 mm², polypropylene insulation, red/black & green/white conductors, twisted into pairs, each pair is aluminium/polyester foil screened, common tinned copper drain wire (24AWG), PVC sheath on standard cables. 60°C. Nominal impedance 45 Ohms.
 

 

The Duct grade type has a black polyethylene sheath, whilst the armoured version is protected by heavy galvanised steel wires and an external grade sheath.

Construction -
Individual and Overall Screen

Tinned copper conductors, polypropylene insulation, twisted into pairs, colour code red/black & green/white, each pair individually screened with aluminium/polyester foil and 24AWG tinned copper drain wire, overall aluminium/polyester foil and 24AWG tinned copper drain wire, PVC sheath on standard cables.

Technical Data
Part No.
Belden
No.
No. of
Pairs
AWG
Weight
Kg/Km
O/D
mm
Capacitance
C/C
pF/m
C/S

  Individual Screen
  2202PIFR    8723   2   22(7)   32   4.2   115   203 
  2202PIFRW    WHITE   2   22(7)   32   4.2   115   203 
  2202PIFRL    LSF   2   22(7)   32   4.2   115   203 
  2202PIFRH    LSHF   2   22(7)   32   4.2   115   203 
  2202PIFRH06    VIOLET   2   22(7)   32   4.2   115   203 
  2202PIFRD    DUCT   2   22(7)   48   6.2   115   203 
  2202PIFRA    SWA   2   22(7)   162   9.8   115   203 

  Individual and Overall Screen
  2202PTFR    8728   2   22(7)   42   5.2   115   203 
  2202PTFRH    LSHF   2   22(7)   42   5.2   115   203 
All the types listed are normally available from stock and not subject to minimum order quantities
Alternative coloured jackets can be produced to meet your specific needs

The violet 2202PIFRH06 is LSHF

UL style numbers are given for cross reference purposes only - not all the cables in this section are tested or approved by UL. If you require UL approved versions please tell us when you first enquire.

At FSC we refer to LSHF as Low Smoke Halogen Free

This term is interchangeable with LSZH (Low Smoke Zero Halogen), LSOH (Low Smoke Zero Halogen), OHLS (Zero Halogen Low Smoke) and FRNC (Flame Retardant Non-Corrosive). Beware of the terms LSF (Low Smoke and Fume) or RP (Reduced Propogation), when relating to signal or control cables will normally be modified PVC and produce 'Loads of Smoke and Fume'!

Fire retardant, fire resistant, flame resistant or flame retardant?

These terms are often misunderstood. Most cables when exposed to fire will not carry on functioning. If you require cable to continue working in the event of fire, and in accordance with various standards please call us.

 

 

 

 

 

 

 

 

 

 

 

 

 

Some common mispellings of Belden Cable include - Beldon, Beldan, Balden, Baldon and Beldin.
Back to last page Return to TOP
Your browser does not support CSS. If images appear below, please disregard them.