• Home
• Case studies
• Information
• Contacts
• Products
• News

Bus Cables

Modern day process control systems now communicate through intelligent devices along a Bus connection allowing the production line to think and talk.  The intelligent devices communicate over high performance cables, often twisted pairs allowing Bi-Directional communication. This modern approach replaces traditional wiring methods using multicore cables saving installation time  and money  whilst increasing productivity.

SimmTronic E-Bus & O-Bus / M-Bus Cables A full range of approved cables are available from stock for the SPECS 3 system	Foundation Fieldbus - Type A Bi-Directional digital Fieldbus cables for instrumentation and process control applications. 1 Pair 18(7)AWG.
Echelon LonWorks® TP/FT10 Cable LonWorks® standard cable for connecting the TP/FT10 Free Topology channel via a single twisted pair	Foundation Fieldbus - Type B Bi-Directional Fieldbus cables for applications up to 31.25 KBits/sec over a single pair. 1 Pair 22(7)AWG
Echelon I/O Cables for LonWorks® Systems 22AWG one and two pair cables for interconnection of the LonWorks® system in automation & BMS applications	Foundation Fieldbus - High Speed A high speed Fieldbus cable providing data transmission rates up to 2.5MBits/sec. 1 Pair 22(7)AWG
DeviceNet™ Thick Cables Backbone wiring cables for the Allen Bradley Open Devicenet™ system	Siemens Profibus A wide selection of Profibus cables are available for process and factory automation providing data transmission up to 12MBits/s
DeviceNet™ Thin Cables “Thin “ cables provide connection of sensors and actuators to the DeviceNet™ backbone system	Pilz Safetybus p® An open Fieldbus system that performs intelligent safety checks during operation. Applications are diverse and range from automated engineering to food production
ASI Bus The AS-Interface cable provides data and power transmission through a two core cable that is polarised for easy termination	Industrial Ethernet Industrial Ethernet cables utilise Category 5 technology to provide a stable platform for linking automation systems and work stations -available in 2 and 4 pair versions
KNX Cable The European Installation Bus concept allows integration of Building Management Systems using a 2 pair 0.8mm screened LSHF cable	CC-Link 1.10 FieldLink Developed by Mitubishi for high speed communications in time critical field applications. 3 x 20AWG
CAN Bus Cables Control Area Network is a non-addressable system adopted by the automation industry. Several different cables are available to meet continually evolving application demands	Modbus Based on B9841 with an increased jacket thickness to ensure correct termination, Modbus provides intelligent master/slave communication
Interbus Cables Based on open ring topology, Interbus uses one cable to route data back and forth to all devices over screened pairs	System Specific Lighting Cables Cables available from stock for Lutron Grafik Eye and Mode Lighting Evolution systems