1. Home
  2. Fire & Security
  3. Fire Cables
  4. Prysmian FP Plus Cable

Prysmian FP Plus Cable

Prysmian New generation FP PLUS sets previously unobtainable levels in ease of installation for an enhanced cable whilst maintaining full compliance with all the necessary test requirements.

FP PLUS is approved for fire detection and fire alarm critical signal paths to BS5839-1:2002+A2:2008 and voice alarm systems to BS5839-8:2008 in enhanced application areas and emergency lighting systems to BS5266-1:2005.

Approved by LPCB & BASEC the FP range of cables from Prysmian lead the world in low voltage fire survival cables ensuring safety as a priority on every installation.

FP PLUS is stocked in red with other colours normally available on short leadtimes. Drum lengths of 100m, 200m, and 500m lengths reduce installation wastage and offer you rapid worldwide availability.

Technical Information

Voltage Rating:300/500V
Temperature Rating:-20°C to +70°C

Construction

Plain copper class 1 or 2, Enhanced Insudite insulation, laminated aluminium foil screen and tinned copper earth wire, LSOH sheath.

Standards

BS 5839-1:2002 +A2:2008Fire detection
BS5839-8:2008Enhanced applications
BS5266-1:2005Lighting systems
BS 7629-1Fire resistant screened cables
BS 6387Category CWZ
BS EN 50200Class PH120
BS 8434-1120 minutes
BS EN 61034-2Low smoke emission
BS EN 60754-2Halogen free
Hover Over Image to Enlarge
Print this page
Part No.Cores x mm²O/D mmSheathColourWeight kg/km
387E01502E2 E 1.59.2LSHFRed115.00
387E01503E3 E 1.58.3LSHFRed121.00
387E01504E4 E 1.59.5LSHFRed148.00
387E02502E2 E 2.511.5LSHFRed176.00
387E02503E3 E 2.59.8LSHFRed179.00
387E02504E4 E 2.511.8LSHFRed205.00
387E04002E2 E 4.012.1LSHFRed269.00

Part codes shown are for a red sheath. For different colours suffix the part code with W for white or B for black.
Standard pack size 100m or 500m. Other sizes are available to order.