1. Home
  2. Data
  3. Bus Cables
  4. Lighting Control and Blind Control Cable

Lighting Control and Blind Control Cable

Cables using LSHF throughout enables installations in locations that prohibit the use of standard PVC types. Where the cable is run outside duct grade and armoured versions are also popular.

If you are installing a Mode Lighting Evolution system we offer an alternative to Belden 1502R. The cable is electrically the same as the Lutron type above but uses a PVC jacket with a reduced overall diameter for easy routing.

Construction - Data Pair

Conductors:22(7)AWG tinned copper strands
Insulation:Polypropylene insulation – 1.83mm nominal
Colour Code:Purple & white
Conductor
Resistance:
58 Ohm/km @ 20°C
Capacitance:Core to core 45pF/m nominal
Screen:Aluminium/polyester screen and 24(7)AWG TCu drain wire
Nominal
Impedance:
120 Ohm

Construction - Power Pair

Conductors:18(7)AWG tinned copper strands
Insulation:Polypropylene insulation – 1.97mm nominal
Colour Code:Power pair - red & black
Conductor
Resistance:
23 Ohm/km @ 20°C

Technical Information

Voltage Rating:300V
Test Voltage:1.5kV
Temperature Rating:0°C to +70°C
Smoke Emission:IEC 61034-1 & 2
Halogen Emission:IEC 60754-1 & 2

Pair bundles laid up with polyester fillers, polyester tape, blue LSHF sheath.

Hover Over Image to Enlarge
Print this page
Part No.Sheath MaterialColourO/D mmWeight KG/KM
Lighting Control Cable
1822LCCHLSHFBlue5.246.00
1822LCCHASWA-PEBlack11.3270.00
1822LCCHDPE-DUCTBlack7.472.00
Mode Lighting Cable
1822ECCPVCBlue6.465.00
1822ECCASWA-PEBlack10.5223.00
1822ECCDPE-DUCTBlack8.789.00
1822ECCHLSHFBlue6.465.00